Garrett at Pro Metal Detector, Multi-Colour, One Size

Product Information

Very low frequency detectors operate on one frequency at a time. According to Lubbert and Ross, they’re made for entry-level hobbyists looking for coins and jewelry, but won’t work well for gold prospecting or scanning saltwater beaches. Most VLF models allow users to switch between a number of frequencies, but rarely allow you to input a specific one yourself. While pulse induction metal detectors are known for their ability to work in highly mineralized soils, their ability to discriminate is pitiful compared to a VLF. However, the CTX 3030 has Smartfind 2D Discrimination to help provide some level of target metal identification. I used it about 4 times n so far is seems real good, it found a small bee bee n a 22 rifle shell, these were really small n it found them PinPoint and Frequency adjustment: Used for pinpointing or if used in combination with the sensitivity button is used to change the frequency of the machine.

Coin mode is designed to search for traditional targets such as coins and jewellery, discriminating against unwanted trash targets like ring-pulls and foil. There is also an option to create your own custom mode, which is a good feature for experienced users that have preferred settings they want to use. Incredible target separation, adjustable features, and built-in GPS are just some of the extra features you’ll learn to use on this premium detector. There are two available frequencies: 12.5 kHz and 17.5 kHz. They can only be used one at a time, and therefore this is not a true multi-frequency detector. In non-motion mode with the specially-designed T100 coil, you can detect as deep as 4 meters. provide all-metal detection to 99 Tones and Beach, Deep, and Cache modes. There is also an option to push depth The Vanquish has waterproof coils up to 1 m (3.3 ft) and Water Resistant control pod (with optional Rain Cover).

Understanding the Garrett AT Pro Double D Search Coil Design:

High-resolution iron discrimination — use touchpads to set iron discrimination at one of 40 levels for the precise ability to separate good targets from trash. The overall performance of the AT Pro is excellent. It displays finds to depths of up to 25cm, and there are ample reports of users getting amazing finds when using the device. Don’t expect to get much deeper than this without sacrificing a lot of accuracy however. This allows you to achieve ultimate depth and extreme thoroughness with every sweep to find targets of all conductivity levels and size. In this case you’ll need to look for a more expensive unit, like the Garrett AT Pro Metal Detector. This metal detector has gold-finding capabilities which not all possess. The reason that gold detecting metal detectors are more expensive is because they require more power.

To summarise it all does really depend on what you are asking, like in all aspects of life it is a matter of

Minelab X-Terra Pro

The search coil on the Whites Treasure Pro is waterproof which means that it can be submerged in certain depths of water for short periods of time. The rest of the metal detector is not resistant to water, however. For many treasure hunters with standard binary audio, junk bottle caps and flat steel washers appear to be good targets. They produce a high-tone target response. This happens because the shape of the bottle cap and the flat surface resemble a coin which fools the detector. With the AT Gold's Tone Roll Audio, however, the bottle cap will produce a very unique response with multiple audio tones. As shown in the illustration above, the bottle cap will yield a distinctive low/high/low response as compared to the coin's unique high-only audio response. More advanced features, worth looking out for, include sensitivity and ground balancing . These will help distinguish between genuine finds and rubbish in mineral-dense soil.

The X-Terra Pro is switchable, single-frequency metal detector with a waterproof rating of 5 metres, The GPZ 7000 performs as advertised. It has an improved detection depth by 40% more than the GPX 5000. It gives up nothing to achieve this type of performance as it detects sub-gram and large nuggets from the surface to three foot depths. In terms of comfort and portability, this metal detector is easy to carry around, coming with its own carry bag to aid transportation. The shaft can be adjusted, not only to help with carrying but also to make it suitable for users of different heights. As a result, the AT Pro is now one of the best performing mid-range metal detectors on the market. It’s known for producing fantastic finds, especially with valuable metals like sliver, while the usability makes it easy to use for pros and amateurs alike.

All Terrain Features of the Garrett AT Pro Metal Detector:

This metal detector consists of three parts, which arrive disassembled. They are the search coil, the lower rod, and the S rod which has the control box attached to it. nuggets proves to be an essential technology in metal detecting. They’re often seen as specialty metal detectors All in all, this is a beginner-friendly metal detector which is also suitable for the avid-detectorist. Working well to limit the amount of ‘junk’ metal you dig up, it’s also waterproof up to 3 m and effective around fresh water. but also a great specialised option to add to a detectorists tool-kit for those who want a modern, fun beach detector. The Garrett AT Pro metal detector — which offers many of the same advanced features as the Garrett AT Gold — is engineered for exceptional performance in dry and wet environments. Compare this model and its accessory options to other models that you will see in our recommendations about underwater metal detectors and beach metal detectors.